The WellBoss ESP POD System is designed for Artificial Lift applications allowing specialist ESP completions to be realized. The WellBoss POD System has been specifically designed so that there is no requirement to rotate either the ESP or shroud independently during assembly, causing possible damage.

Instead there is a seal stack within the upper mandrel sub of the POD assembly, which creates a pressure barrier between the shroud ID, and production annulus when mated with the lower mandrel sub at the top of the shroud assembly. The cable penetrator, control bypass lines etc. are made up to the upper mandrel sub before being lowered into the lower mandrel Sub, which is fixed to the top of the shroud. As the upper mandrel sub is lowered into the lower mandrel sub the seal stack engages with the seal bore inside the housing and the full assembly shoulders out. The upper and lower mandrels are then secured in position, providing the same tensile load as the shroud tubulars.

DOWNLOAD FLYER

POD System Spec Sheet
Features

ESP Completions with requirement to prevent fluid on casing

Intelligent well completions

Dual ESP Completions – single or multiple zone production

Dual Concentric ESP Completions

Dual Tandem ESP Completions

Up to 7,500 psi working pressure

Materials to suit all well environments

Protects ESP during deployment and protects casing from exposure to well fluid

Allows production from single or separate zones, either single, comingled or separate flow

Dual Tandem ESP completions maximize production in wells with small casing

Pressure barrier between upper and lower completions

Multiple/single ports through mandrel to suit cable penetrator requirements

Optional additional ports for monitoring or gas venting

Let’s Get to Work.

That well won’t complete itself. Tell us more about your completions needs and well environment, and we can provide our best recommendations.

Contact Us